Product Reviews

SmallRig Cold Shoe Mount Review: A Simple Two-Piece Accessory Mount

A practical choice for camera-cage and rig users who need fixed cold shoe points for a microphone, flash, or LED accessory.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Cold Shoe Mount review centers on a compact two-piece set for adding accessory positions to compatible camera rigs.

Its threaded attachment options and included hardware suit users who want a straightforward way to mount a microphone, flash, or LED light.

SmallRig Cold Shoe Review Summary

The quick verdict

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical choice for camera-cage and rig users who need fixed cold shoe points for a microphone, flash, or LED accessory.

  • Two cold shoe mounts are included, each measuring 25 by 25 mm.
  • Aluminum alloy construction forms the body of each mount.
  • Each mount can attach through a 1/4-inch-20 screw or two M2.5 screws, depending on the threaded holes available.
  • The cold shoe is intended to hold camera accessories such as microphones, flashes, and LED lights.

Pros

  • Two mounts let buyers add more than one accessory position.
  • The 1/4-inch-20 and M2.5 hardware gives options for compatible threaded mounting points.

Consider before buying

  • The fixed cold shoe does not offer the angle adjustment of a ball-head mount.
  • Compatibility requires checking the exact threaded holes and mounting layout on the cage or accessory.
Read the full review summary

SmallRig’s Cold Shoe Mount 2060 gives camera-cage users two low-profile shoe mounts, each with a 1/4-inch-20 attachment point and two M2.5 screws.

The shoe adapter is designed for threaded holes on cages, handles, plates, and other camera accessories, so it can add an accessory position without relying on a camera’s built-in shoe.

The appeal is practical flexibility: mount a supported accessory on a compatible rig, use the supplied screws, and refer to the white arrows for orientation.

It is best for buyers who already know where they want a fixed mount and can confirm the hole pattern and clearance on their setup. It is not designed for DJI or Zhiyun gimbals.

The buying factors

SmallRig Cold Shoe Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Rig compatibility

Supports 1/4-inch-20 threaded attachment points and can also use M2.5 screws, with a specific cage exception to note.

8/10

Accessory versatility

The cold shoe is intended for common camera accessories including microphones, flashes, and LED lights.

7/10

Mounting flexibility

Two mounting approaches are available, though the correct hardware depends on the specific cage or accessory.

7/10

Setup guidance

White directional arrows and included hex spanners help make orientation and fastening more straightforward.

8/10

Pack value

The package includes two mounts and hardware for both mounting methods, useful when building out more than one rig position.

5/10

Specialized rig fit

The product explicitly excludes DJI and Zhiyun gimbals, and one SmallRig full cage requires a different screw approach.

Key Features and Specifications of SmallRig Cold Shoe

  • Two cold shoe mounts are included, each measuring 25 by 25 mm.
  • Aluminum alloy construction forms the body of each mount.
  • Each mount can attach through a 1/4-inch-20 screw or two M2.5 screws, depending on the threaded holes available.
  • The cold shoe is intended to hold camera accessories such as microphones, flashes, and LED lights.
  • Two white arrows indicate the mounting direction, and bent bevels at one end help retain an attached accessory.
  • The package includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.

Pros and Cons of SmallRig Cold Shoe

Pros

  • Two mounts let buyers add more than one accessory position.
  • The 1/4-inch-20 and M2.5 hardware gives options for compatible threaded mounting points.
  • Small 25 mm square footprint can fit into cage and handle setups where space matters.
  • Directional markings and included spanners make the intended installation easier to follow.

Consider before buying

  • The fixed cold shoe does not offer the angle adjustment of a ball-head mount.
  • Compatibility requires checking the exact threaded holes and mounting layout on the cage or accessory.
  • It is not suitable for DJI or Zhiyun gimbals.

Who Should Buy SmallRig Cold Shoe?

Good fit

Consider the SmallRig Cold Shoe Mount 2060 if you need simple, fixed accessory points on a camera cage, handle, plate, or similar rig component.

The two-piece pack is especially useful if your setup calls for separate mounting positions for a microphone and light, or if you want a spare mount for another compatible rig.

Before choosing it, check the attachment points and the space around the intended location. The mount can use a 1/4-inch-20 screw or two M2.5 screws, but the right method depends on the accessory or cage.

For a SmallRig Full Cage 1661, use the included 1/4-inch-20 screw; the M2.5 holes are unnecessary. The arrows also help orient the shoe as intended.

This is a sensible add-on for buyers who value a compact mount with standard hardware and do not need repositioning after installation.

Its design prioritizes a simple mounting point over articulation, so it works best when the chosen location already gives the attached accessory the position you need.

Who should skip it

Skip this model if the mount needs to attach to a DJI or Zhiyun gimbal, which the product excludes. Also look for an adjustable mount if you need to change an accessory’s angle during setup or between shots.

If your cage has an unusual hole layout, confirm that it matches one of the supported threaded attachment methods before buying. The supplied screw options do not guarantee fit with every camera rig.

How the SmallRig Cold Shoe Fits a Camera Rig

Mounting hardware and fit

The 25 mm square base is made to connect to threaded holes using a 1/4-inch-20 screw or two M2.5 screws.

That gives buyers some choice across cages, handles, and plates, but fit still depends on the hardware layout at the chosen location. Check screw alignment and nearby obstructions before committing to a position.

A fixed shoe for common accessories

The cold shoe provides a place to attach a microphone, flash, or LED light to a compatible rig.

Bent bevels on one end are intended to help prevent an accessory from sliding off accidentally, while the directional arrows show how to orient the mount.

These details support a secure, properly aligned setup, but they do not replace checking that the accessory seats correctly.

What the two-piece package changes

Having two mounts makes it possible to add separate shoe positions or keep one available for another compatible setup. Each mount comes with the relevant screw options, while two hex spanners are included for fastening.

This package is useful when a single mount would leave another accessory without a suitable point on the rig.

Where the design has limits

The mount is a fixed adapter, so it will not angle an accessory after installation. Buyers who want to tilt a light or monitor should choose an articulating design.

Compatibility also has explicit boundaries: the mount is not intended for DJI or Zhiyun gimbals, and SmallRig Full Cage 1661 should use the 1/4-inch-20 screw rather than the M2.5 holes.

Alternatives to SmallRig Cold Shoe

Camera Flash Shoe Mounts alternative

SmallRig Double Ball Head Adapter 1135
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Adapter 1135

Choose the 2060 if you want two simple fixed mounts and can attach them to compatible threaded holes. The 1135 is a better fit when angle adjustment matters and its single ball-head setup suits your accessory and load.

  • The 1135 uses a double ball head that rotates up to 180 degrees and locks with a side wingnut; it includes a shoe base and 1/4-inch screw.
  • Its recommendation is not to use it for monitors or LED lights over 1 kg.
  • The SmallRig Cold Shoe Mount 2060 provides fixed accessory attachment points and does not offer angle adjustment.

Camera Flash Shoe Mounts alternative

SmallRig Mini Ball Head Cold Shoe Mount 3577
4.5/5

700+ ratings

Read Amazon Reviews

SmallRig Mini Ball Head Cold Shoe Mount 3577

The 2060 suits buyers who need two fixed shoe positions and the supplied threaded mounting options. Consider the 3577 for a lighter single accessory that needs tilt adjustment, provided its 250 g support limit fits your device.

  • The 3577 is a single 20 g mini mount with a ball head that tilts up to 138 degrees and supports devices up to 250 g.
  • It has a 1/4-inch screw on top and a cold shoe adapter at its base for attaching to a camera or cage.
  • The SmallRig Cold Shoe Mount 2060 is a two-piece set of fixed mounts using 1/4-inch-20 or M2.5 attachment hardware.

Is SmallRig Cold Shoe Worth It?

The SmallRig Cold Shoe Mount 2060 is worth considering when you need compact, fixed shoe mounts for accessories on a compatible camera cage, handle, or plate.

Two mounts, dual screw options, and included fastening tools make the package practical for expanding a rig.

Check the threaded-hole layout and the stated gimbal exclusions before buying.

If you need to reposition an accessory’s angle, choose an articulating mount; if a fixed shoe in a confirmed compatible location meets your needs, this SmallRig set is a straightforward option.

Your review at a glance

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical choice for camera-cage and rig users who need fixed cold shoe points for a microphone, flash, or LED accessory.

  • Two cold shoe mounts are included, each measuring 25 by 25 mm.
  • Aluminum alloy construction forms the body of each mount.
  • Each mount can attach through a 1/4-inch-20 screw or two M2.5 screws, depending on the threaded holes available.
  • The cold shoe is intended to hold camera accessories such as microphones, flashes, and LED lights.

Written by

centurycityview.org Editorial Team

Editorial team

centurycityview.org publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Cold Shoe Mount 2060

SmallRig Cold Shoe Mount 2060

A practical choice for camera-cage and rig users who need fixed cold shoe points for a microphone, flash, or LED accessory.

  • Two cold shoe mounts are included, each measuring 25 by 25 mm.
  • Aluminum alloy construction forms the body of each mount.
Check Video Reviews on Amazon